High performance.
Sandblasting capacity reaches 37 m2/hour
Why choose GMA GARNET garnet abrasive for sandblasting?
Sandblasting capacity reaches 37 m2/hour
Up to 30% reduction in abrasive costs*
Unsurpassed frequency and profile uniformity
Complies with all safety and environmental standards
The average consumption of pomegranate is 300 kg/h, of crushed shot - 750 kg/h when working with the same productivity.
The use of garnet as an abrasive alternative to electrocorundum allows saving up to 30% of the cost with the same productivity.
The productivity of blasting with garnet is up to 37 m2/h, the consumption is 8-10 kg/m2. The productivity of processing with slag abrasives is 10 m2/hour, the consumption is 15-35 kg/m2.
Stainless steel
Aluminum
Titanium
![]() Shipbuilding
Cleaning of ship hulls, propellers, kingstone gratings |
![]() Carriage building
Repair and preparation of objects for painting |
![]() Mechanical engineering
Machining pressure vessels, complex parts of any size |
![]() Oil and gas industry
Cleaning a gas or oil pipeline |
![]() Car service and car restoration
Cleaning discs and preparing the body for painting |
---|
![]() |
ALEXANDER REDKIN Project Manager R-Garnet JSC Tel.: +7 (800) 700-94-64, ext. 7029 Mobile.: +7 981 849-94-05a.red@rosmark.ru | ![]() | KITSAK BOGDAN Head of Sales Department of R-Garnet JSC Tel.: +7 (812) 703-12-64 ext. 6263 Mobile.: +7 (911) 926-69-42 kitsak@rosmark.ru |
The performance of the sandblasting machine largely depends on the quality and type of abrasive. For sandblasting, such abrasive materials are used:
The main working characteristic of the abrasive for sandblasting, which affects the speed and efficiency of cleaning, is the hardness of its particles. There is no clear answer to the question of which abrasive material is better, however, the quality of the work performed depends on the right choice of sand. In terms of price-to-quality ratio, garnet surpasses many abrasives. It is extracted by crushing natural minerals of the garnet group, so it is environmentally safe. The high hardness of this abrasive allows it to be reused for work. Due to the good performance, sandblasting with pomegranate sand is used in many industries and economic activities.
To indicate the granularity of sand, the mesh unit of measurement is used. It means the size of the fraction prevailing in the total mass. Garnet of the 20/40 mesh fraction is well suited for cleaning metal surfaces from rust and oxide, removing paint and sandblasting. To remove burrs from cast parts, when polishing stainless steel and engraving glass, a fraction of 30/60 mesh is used.
The company "R-Garnet" supplies pomegranate sand produced by well-known companies. We will quickly deliver the abrasive, the quality of which is confirmed by international certificates, to any city in Russia. Pickup from our warehouses located in St. Petersburg, Moscow, Yekaterinburg, Perm, Chelyabinsk, Novosibirsk, Nizhny Novgorod, Rostov-on-Don, Samara is also possible. The company's assortment includes pomegranate sand of all running fractions, conveniently packaged in bags and pallets.